Netcomm NP6800 User Manual download pdf (Page 18)

www.netcomm.com.au Rev.1 - YML655

Page 18 NP6800 - Wireless LAN Access Point

Configuring the Access Point via Ethernet

The SNMP Manager provides a GUI custsomisation tool which can be accessed by your

ethernet or wireless connection. Before using the SNMP Manager you will need to assign a

temporary IP address.

Assigning a Temporary IPAddress

If you wish to use the SNMP Manager utility to configure the Access Point, you must assign a

temporary IP address to your computer.

1. Click on Start->Settings->Control Panel, and then double-click on the Network icon.

2. Select the network adapter associated with the TCP/IP and click Properties.

3. Write down your current settings in order to restore your TCP/IP configuration.

4. Select Specify an IP address and enter the following values:

IP Address: 192.168.168.50

Subnet Mask: 255.255.255.0

5. Click OK and click OK again in the Network window.

6. Restart your computer and continue .

Once you have completed the Access Point configuration, you can set the computer back to its

previous settings. For example, to “Obtain an IP Address automatically.”

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

No comments

Netcomm NP6800 User Manual Page 18