Netcomm NB6PLUS4WN User Manual download pdf (Page 28)

NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide YML854Rev1

28 www.netcomm.com.au

Setting up TCP/IP

In order to access the Internet through the ADSL Router, each host on your network must install/setup TCP/IP ﬁrst. Please follow the

steps below to set your network adapter.

If the TCP/IP protocol has not been installed yet, please follow the steps below for installation. In the following

illustrations, we will set the PC to get an IP address automatically at the same time.

For Windows 98

1. Open the Start menu, point to Settings and click on Control Panel.

2. Double-click the Network icon.

3. The Network window appears. On the Conﬁguration tab, check out the list of installed network components.

Option 1: If there is no TCP/IP protocol, click Add.

Option 2: If you have TCP/IP protocol, skip to Step 6.

4. Highlight Protocol and click Add.

5. Highlight Microsoft on the left side of the window, and select TCP/IP on the right side. Then click OK.

6. When returning to the Network window, highlight TCP/IP protocol for your NIC and click Properties.

7. On the IP Address tab: Enable Obtain an IP address automatically and click OK.

8. When returning to the Network window, click OK

9. Wait for Windows when copying ﬁles.

10. When prompted with System Settings Change dialog box, click Yes to restart your computer.

For Windows ME

1. Open the Start menu, point to Settings and click on Control Panel.

2. Double-click the Network icon.

3. The Network window appears. On the Conﬁguration tab, check out the list of installed network components.

Option 1: If there is no TCP/IP protocol, click Add.

Option 2: If you have TCP/IP protocol, skip to Step 6.

4. Highlight Protocol and click Add.

5. Highlight Microsoft on the left side of the windows, and select TCP/IP on the right side. Then click OK.

6. While returning to Network window, highlight TCP/IP protocol for your NIC and click Properties.

7. On IP Address tab: Enable Obtain an IP address automatically and click OK.

8. While returning to the Network window, click OK.

9. Wait for Windows when copying ﬁles.

10. When prompted with the System Settings Change dialog box, click Yes to restart your computer.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 169 170

No comments

Netcomm NB6PLUS4WN User Manual Page 28