Netcomm NB1300 User Manual download pdf (Page 50)

www.netcomm.com.au Rev. 1- YML672

Page 50 NB1300_2 ADSL Modem

Advanced

RIP Configuration

The RIP Per Interface Configuration page allows the user to set the configuration for each

Interface (PVCs, PPP Sessions, USB and LAN).

Interface: This field allows the user to choose the Interface (PVCs, PPP Sessions, USB and

LAN), for the RIP to be configured.

Enable: This field allows the user to Enable (Yes) or Disable (No) the specified interface for

RIP.

Supplier: This field allows the user to select the Supplier Mode (RIP Transmit).

❏ Disabled: The supplier transmit is disabled.

❏ V1 BC: The supplier transmits in RIPv1 Broadcast.

❏ V2 BC: The supplier transmits in RIPv2 Broadcast.

❏ V2 MC: The supplier transmits in RIPv2 Multicast.

Listener: This field allows the user to select the Listener Mode (RIP Receive)

❏ V1: The listener receives the RIPv1 only.

❏ V2: The listener receives the RIPv2 only.

❏ V1+V2: This listener receives the both RIPv1 and RIPv2.

Supplier and Listener are based on section 4.1 "Compatibility Switch" in RFC 1723.

Current RIP Settings: This field displays the each interface's RIP status.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 83 84

No comments

Netcomm NB1300 User Manual Page 50